Cummins Power Generation A066Z194 Details and Specifications
High Altitude Kit Selection
- This High Altitude Kit fits Cummins P2500i Generators with Build Date of September 2020 or Later. For 98cc engines only.
- Please refer to the "Build Date by Serial Number" Document in the Product Information PDFs.
- If Your Generator was built before September of 2020, you need the A058V023 High Altitude Kit.
P2500i High Altitude Carburetor Kit
The high altitude carburetor kit includes carburetor jets and carburetor seals for operation at altitudes above 2000 feet above sea level. The high altitude carburetor jets fit the 98cc P2500i gasoline engine.
As altitude increases, the amount of oxygen in the atmosphere decreases by approximately 3 percent for every 1000 feet in elevation. The factory installed carburetor jets perform best at altitudes below 2000 feet. Above 2000 feet, the fuel-to-air mixture becomes too rich. High altitude jets provide the right mixture of fuel and air.
The 98cc high altitude carburetor kit for the P2500i includes four sets of jets and seals.
Operating at Altitude | High Altitude Carburetor Kit Jets |
Below 2000 Feet | Use the Factory Installed Carburetor Jet. |
2000-3000 Feet | 98cc High Altitude Jet A |
3000-5000 Feet | 98cc High Altitude Jet B |
5000-6000 Feet | 98cc High Altitude Jet C |
6000-7000 Feet | 98cc High Altitude Jet D |
Every 1000 feet in altitude decreases available power by approximately 3 percent because of the corresponding decrease in atmospheric oxygen. Use of the correct high altitude jets above 2000 feet will reduce fuel consumption and emissions compared to factory jets, but does not improve power output.
**Important Operation Note: Use of a high altitude jet below 2000 feet may damage the generator engine if operated under load or for more than a few minutes.
