Generac Power Systems RXSW200A3SPD Details and Specifications
Generac Automatic Transfer Switch + Surge Protection Device
200 Amp Single Phase 120/240 Volts Whole House Switch Indoor/Outdoor NEMA 3R UL 1449 Made in the USA
Generac 200 Amp Automatic Transfer Switch with built in Surge Protection Device (SPD). Meets the new NEC Requirement 2020/2023 Article 230.67 for a Surge Protection Device.
Article 230.67: "A Type 1 or Type 2 surge protection device (SPD) is required to be installed on dwelling unit services. The SPD may be integral to or adjacent to the electrical service. Additionally, an SPD will be required when an existing service is replaced."
The Generac SE Rated ATS is a whole house switch for connecting a standby generator to the main service panel. Every home standby generator system requires a transfer switch. When an outage strikes, the generator starts within seconds and signals the transfer switch. The transfer switch disconnects the utility from the home's electrical system before it connects the generator. When the uitlity restores power, the system switches back to utility power and the generator shuts down.
The Surge Protection Device meets requirements for Type 1 and Type 2 installations.
Generac Whole House Transfer Switch
The Generac Whole House Transfer Switch has an indoor/outdoor rated NEMA 3R Aluminum enclosure. It can manage up to 4 HVAC loads without additional hardware. Smart Management Modules extend the capability to manage up to 8 additional loads—one of the most installation efficient power management options available.
- Compatible with Generac Single Phase Generators with an Evolution or Nexus Controller.
- Tested and listed for safe, reliable performance.
- UL Listed—UL-1449
- USA Engineered and Built
- Generac 50-Amp Smart Management Module (sold separately)
- Generac 100-Amp Smart Management Module (sold separately)
The RXSW200A3SPD Automatic Transfer Switch includes a Generac 5-Year Limited Warranty
