Generac Power Systems RXG10EZA1W Details and Specifications
Generac 50-Amp Pre-Wired 10 Circuit Load Center ATS
50 Amps 10-Circuits Pre-Wired NEMA 1 Indoor Enclosure
The Generac 50-Amp 10-Circuit Pre-Wired Switch automatic transfer switch RXG10EZA1W provides up to 10 circuits with power from the generator during a power outage. Designed specifically for installations where only the most essential and critical circuits receive power during an outage.
With utility power on, the transfer switch load center distributes power from the main circuit breaker panel to the circuits supplied by the transfer switch. When an outage hits, the transfer switch waits for the generator to start, then disconnects the main panel and connects power from the generator to the circuits in the load center—isolating utility power from the generator.
RXG10EZA1W Pre-Wired Circuits
Circuit | Quantity | Circuits Used |
120/240-Volts 30 Amps | 1 | 2 |
120/240-Volts 20 Amps | 1 | 2 |
120-Volts 15 Amps | 3 | 3 |
Generac RXG10EZA1W 50-Amp 10-Circuit Automatic Transfer Switch
The Generac RXG10EZA1W has a NEMA 1 steel enclosure rated for indoor use only. The open transition switch disconnects the current power source before switching to the alternate power source. This automatic transfer switch has a 50-Amp rating.
Five seconds (adjustable to 2 to 1500 seconds) after the power goes out, the RXG10EZA1W signals the generator to start. After a 5 second warmup, the transfer switch disconnects the utility source and connects the generator to the 10 circuits in the ATS. When utility power returns, the ATS waits to ensure it is stable before transferring back to the utility. The generator runs for one minute without load to cool down.
The transfer switch allows manual operation without power applied when not energized.
RXG10EZA1W Features
- Pre-wired 30-foot whip connects to the external generator connection box
- Pre-wired 2-foot whip connects the ATS to the existing electrical panel.
- Rated for all classes of residential loads inductive and resistive.
- Fully automatic—transfers essential and critical loads from utility power to generator power and back
- Flush mountable. Installs near the existing distribution panel.
Generac provides a 5-Year Limited Warranty on the RXG10EZA1W.