Kohler Generators GM84662-KP2-QS Details and Specifications
Kohler RXT Status Indicator Module + Load Shed Status
Indicates Power Source: Generator or Utility to the RXT Transfer Switch. For Indoor and Outdoor Installations
Indicates Load Control Status for 2 HVAC Loads and 4 Customer Supplied Loads
Kohler Status Indicator LED Display Accessory for RXT Transfer Switch
See the status of your RXT automatic transfer switch at a glance. The LED indicator lets you know whether power is coming from the utility or your Kohler generator without removing the transfer switch cover or going outdoors.
Load Status LED Indicators (GM84662-KP2-QS)
Red LED = Load Shed (Disconnected)
Green LED = Load Added (Connected)
Flashing Red LED = Test—Load Disconnected
RXT Transfer Switch Power Source
The Status Indicator Kit provides an LED display that indicates whether the power source is coming from the utility or the generator.
The indicator panel mounts on the outside of the transfer switch for clear visibility, and is protected by an overhang on the enclosure.
The kit can be used on transfer switches installed both indoors and outdoors.
Transfer Switch Compatibility
Intended for RXT transfer switches with the Combined Interface/Load Control Board installed.
The RXT status indicator module is compatible only with Kohler RXT automatic transfer switches without a load shed kit or combined interface/load management board. Suitable for RXT transfer switches that have a 12 or 16 space load center. Not compatible with any other transfer switch. Requires a Kohler RXT transfer switch connected to a Kohler generator set equipped with the RDC2 or DC2 controller for proper indicator LED operation.
See the status of your RXT automatic transfer switch at a glance. The LED indicator lets you know whether power is coming from the utility or your Kohler generator without removing the transfer switch cover or going outdoors.
See power status at a glance
The Status Indicator Kit provides an LED display that indicates whether the power source is coming from the utility or the generator.
Six Load Status Indicators, four customer-supplied loads and two HVAC loads.
Load Shed Test Button - exercises the load shed relays in the sequence of assigned priority.
The indicator panel mounts on the outside of the transfer switch for clear visibility, and is protected by an overhang on the enclosure.
The kit can be used on transfer switches installed both indoors and outdoors.
Compatibility:
The status indicator is designed only for the Kohler Model RXT automatic transfer switch. It will not connect to or operate with any other ATS. The Model RXT transfer switch must be connected to a Kohler generator set equipped with the RDC2 or DC2 controller for proper indicator LED operation. The GM84662-KP2-QS is only for RXT automatic transfer switches with a combined interface/load management board
